Structural assessments
On-site condition surveys with load-rating reports your jurisdiction will accept.
Learn moreStagholt is a boutique civil-engineering studio restoring bridges, dams, and heritage structures across the Northeast. We pair forty-seven years of field judgment with modern load analysis — so every recommendation is one you can defend.
Six disciplines, one studio. We assess, analyze, and document — never just sign off.
Every engagement is led by a principal engineer — from site visit to stamped drawings.
On-site condition surveys with load-rating reports your jurisdiction will accept.
Learn moreModern finite-element modeling of legacy structures — including riveted and pinned connections.
Learn moreDamper, isolation, and bracing strategies tuned to your structure's actual response, not a code minimum.
Learn moreRepairing the masonry, timber, and ironwork that built the region — keeping it standing for another century.
Learn moreFHWA-compliant routine and in-depth inspections, photographed, sketched, and rated to NBIS.
Learn moreStamped drawings, calculations, and submission packets that move through municipal review without re-cycle.
Learn moreWe don't subcontract the site visit. The principal in charge is the one walking the bridge deck and writing the recommendation — usually within seventy-two hours of being called.
Most consultancies hand you a load rating. We hand you the math behind it, the photographs that support it, and the second-opinion call we made before signing.
If a structure can be repaired instead of replaced, we will say so — even when the replacement is the more profitable scope. Most of what we touch is older than the office that hired us.
A 1909 Pratt truss carrying state route 12 was load-posted at six tons. We modeled every riveted connection, replaced 14% of the gusset plates, and lifted the rating back to legal load — saving the county a $4.6M replacement.
A principal engineer walks the structure, photographs the condition, and listens to what the operator has been watching.
We build the model from the as-built drawings — or, when those are missing, from a measured field survey — then load-rate against current code.
A short, honest letter: what to repair, what to monitor, what to replace, and which option saves the most life-cycle cost.
Stamped drawings, calculations, and an inspection-grade photograph packet your jurisdiction will accept on the first submission.
A century-old highway bridge was twenty days from being load-posted off the state route map. We modeled every riveted connection, replaced what we had to, and gave the county a load rating they could defend. Total project cost was 11% of the replacement estimate.
Our work clusters where steel, masonry, and concrete need a second opinion: small municipalities, heritage trusts, and the engineering departments of mid-sized industrial sites that cannot afford a wrong call.
Forty-one years in heavy civil. Wrote the state's current bridge inspection manual.
Specialty in masonry stabilization and historic ironwork. Carnegie Mellon, 2003.
Performance-based seismic design. Previously with the USGS NEHRP program.
Runs every routine and in-depth NBIS inspection. NHI-trained, drone-certified.
A short essay on why modern FEA misses what hand-calculations catch — written after the Stoneford project.
Read articleTwelve heritage projects, side-by-side cost data. Why repair wins on six out of seven structural categories.
Read articleASCE regional meeting talk on helical anchor systems for unreinforced masonry walls.
Watch talkTell us what is moving, cracking, settling, or waiting for approval. A principal engineer will review the note before we reply.